Industrial Products

INDUSTRIAL
View as Grid List

Items 1-48 of 87

Page
Set Descending Direction
per page
  1. MD6751 MD6751 Digital AC-DC Controller for Typ 200W
    • Highly efficient resulting in 20% smaller magnetics
    • Fully digital-controlled PFC and LLC current-resonant circuits
    • Soft start
    • No lossy discharge resistor required with X capacitor
    • Bridgeless PFC circuit
    • Continuous Conduction Mode (CCM) PFC control
    • Fully protected – Over voltage, over current, over-load, under voltage, thermal...
    US$0.00
    Compare
  2. MD6752 MD6752 Digital AC-DC Controller IC for Typ 500W in SOP28
    • Highly efficient resulting in 20% smaller magnetics
    • Fully digital-controlled PFC and LLC current-resonant circuits
    • Soft start
    • No lossy discharge resistor required with X capacitor
    • Bridgeless PFC circuit
    • Continuous Conduction Mode (CCM) PFC control
    • Fully protected – Over voltage, over current, over-load, under voltage, thermal...
    US$3.08
    Compare
  3. MD6752S MD6752S Digital AC-DC Controller IC for Typ 500W in SSOP32
    • Highly efficient resulting in 20% smaller magnetics
    • Fully digital-controlled PFC and LLC current-resonant circuits
    • Soft start
    • No lossy discharge resistor required with X capacitor
    • Bridgeless PFC circuit
    • Continuous Conduction Mode (CCM) PFC control
    • Fully protected – Over voltage, over current, over-load, under voltage, thermal...
    US$0.00
    Compare
  4. NR264S NR264S DC-DC Converter IC
    • Efficiency 94% at normal load (VIN = 12 V, VOUT = 5 V)
    • Efficiency 86% at light load 10mA
    • Stable with a low ESR ceramic output capacitor
    • Synchronous rectification
    • Enable function
    • Frequency limit in light load is limited to 28 kHz)
    • Over current protection
    • Thermal protection with auto restart
    • Under voltage protection
    US$1.09
    Compare
  5. SAM212M05BF1 SAM212M05BF1 High Voltage 3-phase Motor Driver 1200V 5A
    • Very Compact 52.5mm x 31mm x 5.6mm
    • Output Switching with 6x IGBT
    • Isolation voltage: 2500V (for 1 min)
    • Built-in thermistor accurately measures chip temperatures (Tc)
    • Built-in bootstrap diode with limit resistors
    • CMOS-compatible input (3.3V or 5V)
    • Shutdown signal input
    US$0.00
    Compare
  6. SAM212M10BF1 SAM212M10BF1 High Voltage 3-phase Motor Driver 1200V 10A
    • Very Compact 52.5mm x 31mm x 5.6mm
    • Output Switching with 6x IGBT
    • Isolation voltage: 2500V (for 1 min)
    • Built-in thermistor accurately measures chip temperatures (Tc)
    • Built-in bootstrap diode with limit resistors
    • CMOS-compatible input (3.3V or 5V)
    • Shutdown signal input
    US$0.00
    Compare
  7. SAM265M50BS3 SAM265M50BS3 3-phase Motor Driver
    • Very Compact 52.5mm x 31mm x 5.6mm
    • Output Switching with 6x IGBT
    • Isolation voltage: 2500V (for 1 min)
    • Built-in thermistor accurately measures chip temperatures (Tc)
    • Built-in bootstrap diode with limit resistors
    • CMOS-compatible input (3.3V or 5V)
    • Shutdown signal input
    US$14.01
    Compare
  8. SCM1242MA SCM1242MA 3-Phase Motor Driver 600V 15A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$0.00
    Compare
  9. SCM1242MF SCM1242MF 3-Phase Motor Driver 600V 15A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$11.13
    Compare
  10. SCM1256MF SCM1256MF 3-Phase Motor Driver 600V 30A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$13.25
    Compare
  11. SCM1261MF SCM1261MF 3-Phase Motor Driver 600V 10A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$10.20
    Compare
  12. SCM1263MF SCM1263MF 3-Phase Motor Driver 600V 15A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$11.31
    Compare
  13. SCM1265MF SCM1265MF 3-Phase Motor Driver 600V 20A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$12.46
    Compare
  14. SCM1272MA SCM1272MA 3-Phase Motor Driver 600V 15A
    • Each Half-bridge circuit includes a pre-drive circuit
    • In case of abnormal operation all outputs shut down via three fault pins connected together
    • Built-in bootstrap diodes with current limiting resistors
    • CMOS-compatible input (3.3V or 5V)
    • Isolation voltage: 2500 V (for 1 min)
    • UL-recognized Component (File No.: E118037)
    • Fault Signal Output at Protection Activation
    US$9.57
    Compare
View as Grid List

Items 1-48 of 87

Page
Set Descending Direction
per page