-
Audio
-
Amplifiers
Pre-amplifiers
Transistors
Balanced I/O
Power Management
Dynamics Processors
Special Function
-
-
Industrial
-
Power Management
Discrete Semiconductors
Op-amps and Comparators
IIoT Memory
Sensor Technology
Alarms and Monitoring
-
-
Partners
-
Applications
- Why Profusion?
- News
- Contact
-
Store
Active
MAS6240C2HP06 Low Noise/EMI Piezo Buzzer Driver
Sku:
MAS6240C2HP06
Features
- Integrated Charge Pump generates 18V from 3V supply
- Single Ended or Differential Output
- Inductorless Solution
- Few External Parts Required
The MAS6240 is a piezo driver device that can drive outputs up to 18Vpp from a 3V supply. An internal three-mode charge pump generates a boosted supply voltage for the piezo driver. To adjust the piezo element sound volume, the charge pump can operate in either 1x, 2x or 3x mode. In 1x mode the output voltage is the same as the input voltage while in 2x or 3x mode the input voltage is boosted accordingly.
The MAS6240 is an easy and low-cost peizo driver solution since only 4 small value capacitors are needed in addition to the sound element. No inductors are required. This design also causes significantly less disturbance to the surrounding circuits making it an ideal choice for sensitive designs. Its charge pump switches at 1MHz, allowing the use of external capacitors as small as 100nF.
Control logic switches the charge pump on at the first rising signal of the digital input (DIN) pin. The switch-off signal is generated while the signal at DIN has been low for 50ms. The piezo driver isenabled at a second rising edge of a pulse at DIN and the signal is transferred to piezo output VO1. The same signal is inverted into output VO2 for the differential output.
A continuous high logic level at the DIN input causes the charge pump to be turned ON but leaves the audio amplifier disabled. In that state the charge pump output can be used to power the external LEDs or any other external circuit. The output voltage is stillselectable in three steps.In "disabled" mode (DIN has been low for 15ms typically) all functional blocks are switched off to achieve a quiescent current of less than 1μA.
Supply Voltage (max) | 3.3V |
---|---|
Supply Voltage (min) | 2.2V |
Supply Current | 1.5mA |
Quiescent Current | 1µA |
V-out max | 18V |
fo-max | 0.008MHz |
Stand-by | Yes |
US/Canadian Customers
Orders below $110.00 can be delivered by Airmail at a rate of $9.00 (allow up to 10 working days) or by tracked courier at a rate of $30.00 (1-3 working days).
Orders above $110.00 are delivered by a tracked courier at a rate of $30.00 (1-3 working days).
Rest of World
Orders below $120.00 can be delivered by post (allowing up to 28 working days) at a rate of $18.00 or by a tracked courier at a rate of $49.00.
Orders above $120.00 are delivered by tracked courier at a rate of $49.00.
All prices shown exclude VAT.