-
Audio
-
Amplifiers
Pre-amplifiers
Transistors
Balanced I/O
Power Management
Dynamics Processors
Special Function
-
-
Industrial
-
Power Management
Discrete Semiconductors
Op-amps and Comparators
IIoT Memory
Sensor Technology
Alarms and Monitoring
-
-
Partners
-
Applications
- Why Profusion?
- News
- Contact
-
Store
Industrial Products
INDUSTRIAL
- LS1240AG-SOP8-TR LS1240AG-SOP8-TR Electronic Tone Ringer
- Low current consumption.
- Integrated rectifier bridge with zener diodes for overvoltage protection.
- Minimum external circuitry.
- Both frequencies of tone and switching are adjustable by external
- components.
- Integrated voltage and current hysteresis.
US$0.20 - MAS6240C2HP06 MAS6240C2HP06 Low Noise/EMI Piezo Buzzer Driver
- Integrated Charge Pump generates 18V from 3V supply
- Single Ended or Differential Output
- Inductorless Solution
- Few External Parts Required
US$0.45 - MAS6241CA1Q MAS6241CA1Q Piezo Driver with 3x ChargePump
- Self-drive method
- Differential output
- Up to 18Vpp output from 3V supply
- Inductorless low EMI solution
- 1MHz switching frequency
US$0.00 - MAS6250BA2Q MAS6250BA2Q Piezo and LED Driver with SynchronousBoost DC/DC Converter
- Both Single Ended and Differential Output
- Up to 35Vpp Output from min 1.2V Supply
- External Drive and Self-Drive Audio Frequency Control for 2-Terminal Piezo
- LED Driver
- High Efficiency
US$0.71 - MAS6251AA1Q MAS6251AA1Q Piezo and LED Driver with Synchronous Boost DC/DCConverter
- Both Single Ended and Differential Output
- Up to 35Vpp Output from min 1.2V Supply
- External Drive and Self-Drive Audio Frequency Control for 2-Terminal Piezo
- LED Driver
- High Efficiency
US$0.00 - MC34118G-S28-R MC34118G-S28-R Voice Switched Speaker-Phone IC
- Improved attenuator gain range: 52dB between Transmit and Receive
- Low voltage operation for line-powered applications(3~6.5V)
- 4-point signal sensing for improved sensitivity
- Background noise monitors for both Transmit and Receive paths
- Microphone amplifier gain set by external
- Resistors-Mute function included
- Chip disable for active/standby operation
- On board filter pinned-out for user defined function
- Dial tone detector to inhibit receive idle mode during dial tone presence
- Equivalent to Atmel U4082B
US$0.72 - MC34119G-SO8-R MC34119G-SO8-R Low Power Audio Amplifier
- Wide operating supply voltage: VCC=2V~16V
- Low quiescent supply current (ICC=2.7mA, typ)
- Power output over 250mW at VCC=6V,
- Load impedance range 8-100Ω
- Low total harmonic distortion (0.5% typ)
- Mute function
- Minimum number of external parts required
US$0.18 - NJU2103ARB1 NJU2103ARB1 System Reset IC
- Full compatible with NJM2103
- Detection Voltage: VSA=4.2V±1.0%
- Adjustable Detection Voltage: VSB=1.22V±1.0%
US$0.46 - NJU72501MJE NJU72501MJE Piezo-sounder Driver with Multi-mode charge pump
- Built-in Charge Pumps(3)
- High Drive Capability (15nF/18V)
- Low Stand By Current
- Single Ended or Differential Output
- Fully Protected Circuitry
US$0.37 - NJU72501V NJU72501V Piezo-sounder Driver with Multi-mode charge pump
- Built-in Charge Pumps(3)
- High Drive Capability (15nF/18V)
- Low Stand By Current
- Single Ended or Differential Output
- Fully Protected Circuitry
US$0.00 - NJU7700F NJU7700F Voltage Detector
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 0.8µA typ. (VDET =3V version)
- Detection Voltage Range: 1.3~6.0V(0.1V Step)
- Output Configuration: Nch. Open Drain type
US$0.10 - NJU7701F NJU7701F Voltage Detector
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 0.8µA typ. (VDET =3V version)
- Detection Voltage Range: 1.3~6.0V(0.1V Step)
- Output Configuration: C-MOS Output type
US$0.10 - NJU7702F NJU7702F Voltage Detector
- High Precision Detection Voltage ±1.0%
- Low Quiescent Current 0.8µA typ. (VDET =3V version)
- Detection Voltage Range 1.3~6.0V(0.1V Step)
- Output Configuration: Nch. Open Drain type
US$0.10 - NJU7702F27-TE1 NJU7702F27-TE1 Voltage Detector
- High Precision Detection Voltage ±1.0%
- Low Quiescent Current 0.8µA typ. (VDET =3V version)
- Detection Voltage Range 1.3~6.0V(0.1V Step)
- Output Configuration: Nch. Open Drain type
US$0.10 - NJU7703F NJU7703F Voltage Detector
- High Precision Detection Voltage ±1.0%
- Low Quiescent Current 0.8µA typ. (VDET =3V version)
- Detection Voltage Range 1.3~6.0V(0.1V Step)
- Output Configuration: C-MOS Output type
US$0.00 - NJU7704F NJU7704F Voltage Detector
- External Capacitor
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 0.9µA typ.
- Detection Voltage Range: 1.5~6.0V(0.1V Step)
- Adjustable delay time with external capacitor
US$0.10 - NJU7704F27-TE1 NJU7704F27-TE1 Voltage Detector
- External Capacitor
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 0.9µA typ.
- Detection Voltage Range: 1.5~6.0V(0.1V Step)
- Adjustable delay time with external capacitor
US$0.10 - NJU7705F NJU7705F Voltage Detector
- External Capacitor
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 0.9µA typ.
- Detection Voltage Range: 1.5~6.0V(0.1V Step)
- Adjustable delay time with external capacitor
US$0.10 - NJU7706F NJU7706F Voltage Detector
- Built-in Adjustable Time Delay
- High Precision Detection Voltage: ±1.0%
- Low Quiescent Current: 1.3µA typ.
- Detection Voltage Range: 1.5 ~ 6.0V(0.1V step)
US$0.11 -
- NJU7708F NJU7708F Voltage Detector
- Built-in Adjustable Time Delay
- High Precision detection Voltage: ±1.0%
- Low Quiescent Current: 1.3µA
- Detection Voltage Range: 1.3 ? 6.0V(0.1V step)
US$0.11 - NJU7709F NJU7709F Voltage Detector
- Built-in Adjustable Time Delay
- High Precision detection Voltage: ±1.0%
- Low Quiescent Current: 1.3µA
- Detection Voltage Range: 1.3 ? 6.0V(0.1V step)
US$0.00 - NJU7710F NJU7710F Voltage Detector
- Low Quiescent Current: 0.8µA typ. (per 1CH)
- High Precision detection Voltage: ±1.0%
- Detection Voltage Range: 1.3~6.0V(0.1V step)
US$0.00 - NJU7711F NJU7711F Voltage Detector
- Low Quiescent Current: 0.8µA typ. (per 1CH)
- High Precision detection Voltage: ±1.0%
- Detection Voltage Range: 1.3~6.0V(0.1V step)
US$0.14 - NJU7712F NJU7712F Voltage Detector
- High Precision detection Voltage: ±1.0%
- Low Quiescent Current: 0.8µA typ. (per channel)
US$0.14 - NJU7713F NJU7713F Voltage Detector
- High Precision detection Voltage: ±1.0%
- Low Quiescent Current: 0.8µA typ. (per channel)
US$0.00 - NJU7719U NJU7719U Voltage Detector
- High Precision detection Voltage ±1.0%
- Low Quiescent Current 0.8µA typ.
- Detection Voltage Range 1.3~6.0V(0.1V step)
US$0.00 - NJU9101MLE-TE1 NJU9101MLE Low Power Analog Front End Sensor Interface
- Low current consumption: 4μA (OPA, OPB), 150μA (ADC)
- Low noise op-amp: 1.3μVp-p typ. (0.1 to 10Hz)
- Low offset voltage op-amp: 300μV max.
- Two simultaneous inputs for precise measurements of two analog signals
US$1.39 - NJU9103V-TE1 NJU9103V-TE1 Analog Front End Micro Power Sensor Interface
- Complete Sensor Signal Conditioning
- Low Average Current Consumption 5µA
- Low Noise Amplifier
- Programmable Gain PreAmp 1V/V to 8V/V
- System Calibration for Offset and Gain Drift
- High Resolution ADC 16 Bits
- 32 to 2,000 samples per second
US$0.46 - NJW1280MG2-TE1 NJW1280MG2-TE1 High Capacitance Piezo-sounder Driver
- Operating Voltage +2.0 to +5.5V
- Consumption Current (Active)
- IDD11=3.5mA typ. (VDD=3V , FIN=4kHz)
- Consumption Current (Shutdown)
- ISD1=0.5μA max. (VDD=3V , IN=0V)
- High Capacitance Driving 30nF typ.
- Differential Output 30VPP max. (VDD=5V)
- Charge pump Circuit 3times
- Input Signal Detector & Auto Shutdown Control
- Operating Temperature -40 to +105°C
- Bi-CMOS Technology
US$0.21 - NJW1280RB2-TE1 NJW1280RB2-TE1 High Capacitance Piezo-sounder Driver
- Operating Voltage +2.0 to +5.5V
- Consumption Current (Active)
- IDD11=3.5mA typ. (VDD=3V , FIN=4kHz)
- Consumption Current (Shutdown)
- ISD1=0.5μA max. (VDD=3V , IN=0V)
- High Capacitance Driving 30nF typ.
- Differential Output 30VPP max. (VDD=5V)
- Charge pump Circuit 3times
- Input Signal Detector & Auto Shutdown Control
- Operating Temperature -40 to +105°C
- Bi-CMOS Technology
US$0.15 - NJW2307VC3-TE2 NJW2307VC3-TE2 FM Modulation/Demodulation IC with PLL
- Operating Voltage (3.8 to 5.5V)
- Low operating Current:
- Mod: 9mA typ.
- Demod: 9.5mA typ.
- Power-Down: 1μA Max
- Deviation (AF_IN = 0.5Vpp) ±15kHz (standard)
- FM Modulation output 1Vpp(standard)
- AF Demodulation output 0.5Vpp(standard))
US$0.76 - TEA1110AG-S14-R TEA1110AG-S14-R Telephone Transmission Circuit
- Low DC line voltage; operates down to 1.6V
- Voltage regulator with adjustable DC voltage
- Provides a supply for external circuits
- Symmetrical high impedance inputs (64kΩ)
- Asymmetrical high impedance input (32kΩ)
- DTMF input with confidence tone
- MUTE input for pulse or DTMF dialling
US$0.21